MIL-STD-1562W

作者:标准资料网 时间:2024-05-15 05:41:43   浏览:8158   来源:标准资料网
下载地址: 点击此处下载
MIL-STD-1562W, MILITARY STANDARD: LISTS OF STANDARD MICROCIRCUITS (25 SEP 1991) [NO S/S DOCUMENT]., This standard establishes the requirements for the selection of microcircuits used in its design, manufacture, and support of military equipment and identifies those devices which are less acceptable for new designs because of their nonavailability or impending obsolesce, or their problems in performance, reliability, or other characteristics.
下载地址: 点击此处下载
基本信息
标准名称:汽车与挂车之间12N型电连接器
英文名称:Electrical connections between motor vehicles and towed vehicles; Type 12N
中标分类: 车辆 >> 车用电子、电气设备与仪表 >> 电子、电气设备
ICS分类: 道路车辆工程 >> 道路车辆装置 >> 电气和电子设备
替代情况:被GB/T 5053.2-2006代替
发布部门: 国家发展和改革委员会
发布日期:1985-03-09
实施日期:1986-02-01
首发日期:1985-03-09
作废日期:2007-08-01
主管部门:国家发展和改革委员会
归口单位:全国汽车标准化技术委员会
起草单位:交通部公路科学研究所
出版社:中国标准出版社
出版日期:1900-01-01
页数:3页
适用范围

没有内容

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 车辆 车用电子 电气设备与仪表 电子 电气设备 道路车辆工程 道路车辆装置 电气和电子设备
Product Code:SAE J2044
Title:Quick Connect Coupling Specification for Liquid Fuel and Vapor/Emissions Systems
Issuing Committee:Fuel Systems Standards Committee
Scope:This SAE Recommended Practice defines standard tube end form dimensions so as to guarantee interchangeability between all connector designs of the same size and the standard end form. This document also defines the minimum functional requirements for quick connect couplings between flexible tubing or hose and rigid tubing or tubular fittings used in supply, return, and vapor/emissions in fuel systems. This document applies to automotive and light truck applications under the following conditions:a. Gasoline and diesel fuel delivery systems or their vapor venting or evaporative emission control systems.b. Operating pressure up to 500 kPa, 5 bar, (72 psig).c. Operating vacuum down to -50 kPa, -0.5 bar (-7.2 psi).d. Operating temperatures from -40 掳C (脨40 掳F) to 115 掳C (239 掳F).Quick connect couplings function by joining the connector to a mating tube end form then pulling back to assure a complete connection. The requirements stated in this document apply to new connectors in assembly operations unless otherwise indicated. For service operations, the mating tube should be lubricated with SAE 30-weight oil before re-connecting.NOTE--New connector designs using the same materials as previously tested connectors may use the original results as surrogate data for 7.1, 7.2, 7.3, and 7.4.Vehicle OEM fuel system specifications may impose additional requirements beyond the scope of this general SAE document. In those cases, the OEM specification takes precedence over this document.