DIN 13-5-1986 ISO米制螺纹.螺纹直径7.5--200mm.螺距1mm和1.25mm的细牙螺纹.公称尺寸

作者:标准资料网 时间:2024-05-16 01:50:50   浏览:9374   来源:标准资料网
下载地址: 点击此处下载
【英文标准名称】:ISOmetricscrewthreads;1mmand1,25mmfinepitchthreadswithdiametersfrom7,5to200mm;nominalsizes
【原文标准名称】:ISO米制螺纹.螺纹直径7.5--200mm.螺距1mm和1.25mm的细牙螺纹.公称尺寸
【标准号】:DIN13-5-1986
【标准状态】:作废
【国别】:德国
【发布日期】:1986-12
【实施或试行日期】:
【发布单位】:德国标准化学会(DIN)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:细牙螺纹;螺纹形状;ISO微型螺纹;螺纹;螺距;直径;螺母;尺寸;ISO米制螺纹;螺栓;紧配合螺纹;米制的;踏步竖板
【英文主题词】:dimensions;bolts;threadpitch;close-fitthreads;diameter;threads;threadforms;isometricthreads;nuts;isominiaturescrewthreads;finethreads;metric;risers;screwthreads
【摘要】:
【中国标准分类号】:J04
【国际标准分类号】:21_040_10
【页数】:4P;A4
【正文语种】:德语


下载地址: 点击此处下载
基本信息
标准名称:动植物油脂 紫外吸光值的测定
英文名称:Animal and vegetable fats and oils—Determination of ultraviolet absorbance expressed ad specific UV extinction
中标分类: 食品 >> 食品综合 >> 基础标准与通用方法
ICS分类: 食品技术 >> 食品试验和分析的一般方法
发布部门:中华人民共和国农业部
发布日期:2008-05-16
实施日期:2008-07-01
首发日期:
作废日期:
主管部门:中华人民共和国农业部种植业管理司
提出单位:中华人民共和国农业部种植业管理司
归口单位:中华人民共和国农业部种植业管理司
起草单位:农业部油料及制品质量监督检验测试中心
起草人:丁小霞、李培武、周海燕、胡乐华、张文、姜俊
出版社:中国农业出版社
出版日期:2008-07-01
页数:6页
适用范围

本标准规定了动植物油脂紫外吸光值的测定方法。
本标准适用于动植物油脂紫外吸光值的测定。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 食品 食品综合 基础标准与通用方法 食品技术 食品试验和分析的一般方法
Product Code:SAE J1432
Title:Rear High Mounted Stop Lamps and Rear High Mounted Turn Signal Lamps for Use on Vehicles 2032 mm or More in Overall Width
Issuing Committee:Heavy Duty Lighting Standards Committee
Scope:This SAE Recommended Practice provides test procedures, requirements, and guidelines for high-mounted stop lamps intended for use on vehicles 2032 mm or more in overall width. This document applies to trucks, motor coaches, van type trailers, and other vehicles with permanent structure greater than 2.8 m high. This document does not apply to school buses, truck tractors, pole trailers, flat-bed trailers, and trailer converter dollies. The purpose of the high-mounted stop lamp or lamps is to provide a signal over intervening vehicles to the driver of following vehicles.